> HOW TO USE > How to use (For models without a seconds hand)

How to use (For models without a seconds hand)

Models: 6870, 6890, 6899

How to set the time

  1. Make sure that the watch is operating.
    To carry out the procedure, please make sure that the watch is in working state.

    2. Please wind the mainspring when the watch is not working.
    How to wind the mainspring

  2. Pull out the crown.

    3. (If the watch is equipped with the screw down crown, unscrew the crown before pulling it out.)

    If the watch is a 68 series model, it continues to move when the crown is pulled out.

    credor_68 Set Time-1-2

  3. Turn the crown to set the hour and minute hands to the time.

    4. credor_68 Set Time-1-3

  4. Push the crown back in to its normal position.

    5. (If the crown of your watch is a screw lock type, lock the crown.)

    credor_68 Set Time-1-4

CAUTION

Due to its gear train mechanism, for setting the time of the mechanical watch correctly, the hands should be set back once slightly and then set forward to the correct time.