How to use (For models with the date)

This watch is equipped with the date display function. The date changes once every 24 hours at around midnight.

Therefore, if the a.m./p.m. is incorrectly set, the date will change around 12:00 p.m.

1. Make sure that the watch is operating.
   To carry out the procedure, please make sure that the watch is in working state.

Please wind the mainspring when the watch is not working.
How to wind the mainspring

2. Pull out the crown to the first click.

(If the watch is equipped with the screw down crown, unscrew the crown before pulling it out.)



3. The date can be adjusted by turning the crown clockwise (12 o’clock direction).

First turn the crown clockwise until the previous day’s date from the desired date appears.

【Ex.】

If you want to set the date to “6,” set the date to “5” by turning the crown clockwise.



4. Pull out the crown to the second click. Pull out the crown when the seconds hand (or the small seconds hand) is at the 12 o’clock position. (The seconds hand or the small seconds hand will stop.)

Turn the crown clockwise until the desired date appears. The time is now set for the a.m. period. Further turn the crown to set the current time



5. Push the crown back into the normal position in accordance with a time signal. The watch starts operating.

(If the crown of your watch is a screw lock type, lock the crown.)

It is necessary to adjust the date after February (which has 28 days, 29 days in a leap year) and a 30 day month.

On the first day, “31” is displayed. Pull out the crown to the first click. Turn the crown clockwise (12 o’clock direction) to set the date to “1”, and push the crown back in to the normal position.