> HOW TO USE > How to use (For models with a seconds hand or a small seconds hand)

How to use (For models with a seconds hand or a small seconds hand)

Models: 6898, 4S71, 4S79, 6S74, 6S96, 6S99

How to set the time

  1. Make sure that the watch is operating.
    To carry out the procedure, please make sure that the watch is in working state.

    2. Please wind the mainspring when the watch is not working.
    How to wind the mainspring

  2. Pull out the crown when the seconds hand (or the small seconds hand) is at the 12 o’clock position. (The seconds hand or the small seconds hand will stop.)

    3. (If the watch is equipped with the screw down crown, unscrew the crown before pulling it out.)

    If the watch is a 6898 model, the small seconds hand continues to move when the crown is pulled out.

    credor_6898 Set Time-1-2

  3. Turn the crown to set the hour and minute hands to the time.

    4. credor_6898 Set Time-1-3

  4. Push the crown back into the normal position in accordance with a time signal.

    5. (If the crown of your watch is a screw lock type, lock the crown.)

    credor_6898 Set Time-1-4

CAUTION

Due to its gear train mechanism, for setting the time of the mechanical watch correctly, the hands should be set back once slightly and then set forward to the correct time.